17 NOVEMBER 2026 · UPDATED 18 NOVEMBER 2026 · EXPOSURE · TECHNIQUE · METERING

Equivalent Exposure Chart: Every Combo for the Same Shot

f/8 at 1/250s, f/11 at 1/125s and f/5.6 at 1/500s all put the same amount of light on the sensor. At ISO 100 every one of them works out to about EV 14, a bright hazy day. The frames will not look the same - depth of field and motion change between them - but the histogram will. That is the whole idea of equivalent exposure, and once you have the chart in your head you stop re-metering every time you change one dial. The exposure calculator works the same trade in third stops.

Why the trade always works

Each of the three settings moves light in the same unit, the stop, and a stop is a doubling or a halving:

Exposure value ties the first two together in one number. At ISO 100, EV is log base 2 of the f-number squared over the shutter time in seconds. Any pair that gives the same EV gives the same exposure. You never need that formula on a shoot. You need the chart it produces.

The chart

This is EV 14 at ISO 100, the f/8 at 1/250s anchor from the top of the post. Read across a row to see what each ISO does to the shutter speed for that aperture. Read down a column to see the aperture and shutter trade at a fixed ISO. Every cell in the table is the same exposure.

Aperture ISO 100 ISO 200 ISO 400 ISO 800
f/1.4 1/8000 - - -
f/2 1/4000 1/8000 - -
f/2.8 1/2000 1/4000 1/8000 -
f/4 1/1000 1/2000 1/4000 1/8000
f/5.6 1/500 1/1000 1/2000 1/4000
f/8 1/250 1/500 1/1000 1/2000
f/11 1/125 1/250 1/500 1/1000
f/16 1/60 1/125 1/250 1/500
f/22 1/30 1/60 1/125 1/250

A dash means the shutter you would need is faster than 1/8000s. On a camera that tops out there, those cells are out of reach without an ND filter or a lower ISO.

The chart is not tied to EV 14. Meter any scene, find your metered setting in a cell, and the whole table shifts with it: every other cell is still the same exposure as that one. In open shade at ISO 400 your meter might say f/4 at 1/250s. Find f/4 on the chart, and the rest of that column now reads one stop per row from there: f/5.6 at 1/125s, f/8 at 1/60s, f/2.8 at 1/500s.

Lock the setting that matters, slide the other two

The chart is only useful if you know which dial is not allowed to move. On a real job it is almost always one of three things.

Depth of field. A family group three rows deep needs f/8 to get the back row sharp. Lock the aperture and read across the f/8 row. At ISO 100 and 1/250s you are fine in bright light. Move into shade and the meter drops two stops, so f/8 now wants 1/60s at ISO 100. That is slow for a dozen people who are blinking and shifting, so slide right two columns to ISO 400 and you are back at 1/250s.

Motion. A kid on a bike or a dog at full run needs 1/1000s or faster, and the shutter speed formula for freezing motion covers why that number climbs with your lens. Lock the shutter. In the 1/1000 cells of the chart your choices are f/4 at ISO 100, f/5.6 at ISO 200, f/8 at ISO 400 or f/11 at ISO 800. Pick the shallowest depth of field you can live with, and the ISO comes with it.

Noise. On a landscape on a tripod, ISO 100 is the setting you protect. Stay in the ISO 100 column and trade aperture for shutter only. Nothing is moving and the camera is locked down, so f/16 at 1/60s is as good as f/8 at 1/250s, and you get the deeper focus for free.

The pattern is always the same: one setting is locked for the picture, one is moved for the light, and the third is left wherever the first two put it. If you fix two of them, the light decides the third.

Where the chart drifts

The labels on your dials are rounded. The f/11 stop is really f/11.3, and the stop after 1/250s is really 1/128s, which cameras mark as 1/125s. The camera uses the exact values internally, so a combination from the chart lands within a small fraction of a stop. That is well inside what a raw file can absorb, and nowhere near enough to show up on a histogram.

Two things can break the chart. Film stops obeying the doubling rule on long exposures, while a digital sensor keeps obeying it, which is covered in the reciprocity failure post. And a dash in the table is a real limit. At f/1.4 in bright sun, ISO 100 and 1/8000s is as far as most cameras go, so the next stop has to come from glass in front of the lens. The ND filter guide counts those stops in the same units.

Third stops, without the arithmetic

The chart above is in full stops because full stops fit on a phone screen. Your camera clicks in thirds, so most of the settings you actually shoot, like f/7.1 or 1/320s, fall between its rows. That is where slipping a stop in your head gets easy.

The exposure calculator does the same job in thirds. Enter the setting your meter gave you, choose which of the three values you want to solve for, change the one you care about, and it gives the setting that holds the exposure, using values that actually exist on your dial. It runs in your browser, and nothing is uploaded.

If you want a starting point before the meter even comes out, the Sunny 16 rule puts you in the right cell of the chart from the shadows alone. Full sun at ISO 100 is f/16 at 1/125s, EV 15, one stop brighter than this table, so in full sun every cell above moves to the next faster shutter speed.

Learn one column

You do not need all thirty-six cells. Learn the ISO 100 column from f/2.8 to f/16 and remember that each ISO step to the right doubles the shutter speed. Everything else on the chart is that one column, moved. If short field references like this are useful, the field-notes emails carry one now and then.

JOB TICKET · MAILING LIST

Get new instruments first

The first one has the whole bench in it. After that, a short note when a new instrument lands or Gallery gets a real update - nothing else, and one click leaves.